| Directions |
- Accurately fill wash bucket, using 1 capful of Zymol Auto Wash per 3.8L (1 gallon) of cold water. We recommend filling another rinse bucket with cold water for rinsing your sponge.
- Before applying wash, thoroughly rinse vehicle with hose and cold water to remove any loose dirt, bird droppings, tree sap, brake dust, etc. We recommend washing your car when its body is cool and in the shade away from overhanging trees.
- Using a Zymol sponge or terry cloth, wash one section at a time and rinse the vehicle frequently. Rinse your sponge/cloth frequently in the rinse bucket before dipping it back in the wash bucket to minimise dirt getting in to the auto wash bucket. Change the water in the rinse bucket when it gets dirty. Do not pour this water on the vehicle.
- For best results, start by washing the roof, then the boot/trunk lid and bonnet, and then working down the vehicle in sections, rinsing after each section is washed. If you are pedantic, you may want to use a second sponge/cloth for dirtier sections such as fenders, lower door panels, grilles, sideskirts, bumpers and lips, or just rinse your main sponge/cloth thoroughly after these sections. Lastly, we strongly recommend washing the wheels with a separate sponge/cloth reserved for washing the rims only.
- Give the entire vehicle a thorough final rinse. To make the drying process easier, we recommend finishing off the rinse step by taking off the hose gun/sprayer and using a gentle, thick stream of water to rinse the vehicle from top to bottom. This allows the water to 'sheet' off the vehicle and removes water droplets on the panels. If your vehicle's paint has been treated with high quality wax, most of the water will have 'sheeted' off completely.
- Dry vehicle thoroughly with a chamois and then finish off by towel drying if required.
|
