Directions |
- Two full squeezes of Zymol Clear Auto Bathe in a clean 19L (5 gallon) wash bucket will provide the correct concentration. Fill the bucket with clean warm water. We recommend filling another rinse bucket with cold water for rinsing your sponge.
- Before applying wash, thoroughly rinse vehicle with hose and cold water to remove any loose dirt, bird droppings, tree sap, brake dust, etc. We recommend washing your car when its body is cool and in the shade away from overhanging trees.
- Using a Zymol sponge, wash sections at a time and rinse the vehicle frequently. Rinse your sponge/cloth frequently in the rinse bucket before dipping it back in the wash bucket to minimise dirt getting in to the Auto Wash bucket. Change the water in the rinse bucket when it gets dirty. Do not pour this water on the vehicle.
- Start by washing the roof, then the boot/trunk lid and hood/bonnet, and then rinse the vehicle and sponge.
- Wash the upper door panels, quarter panels and tail/rear. Rinse the vehicle and sponge.
- Wash the lower door panels, grilles, sideskirts, bumpers and lips. Rinse the vehicle and sponge.
- Wash the wheels using a separate sponge/cloth reserved for washing the rims only. Rinse wheels and sponge.
- Give the entire vehicle a thorough final rinse. To make the drying process easier, we recommend finishing off the rinse step by taking off the hose gun/sprayer and using a gentle, thick stream of water to rinse the vehicle from top to bottom. This allows the water to 'sheet' off the vehicle and removes water droplets on the panels. If your vehicle's paint has been treated with high quality wax, most of the water will have 'sheeted' off completely.
- Dry vehicle thoroughly with a chamois and then finish off by towel drying if required. Only use high quality chamois like the Zymol Synthetic Chamois or true English cod oil tanned chamois as many chamois will strip the wax.
|